DVB-T2, the new generation of digital terrestrial broadcasting that is about to become an inseparable companion to our television, is now upon us. Some critical steps are still missing, and then the revolution must be completed between the end of 2022 and the beginning of 2023.
It should be conditionally mandatory, since there are still problems caused by the closure on March 8, when opinion And the Mediaset They switched to the new coding for a short while with the new old double chance.
Both with advent MPEG-4 (For everyone) And after the rearmament was completed last June 2022, with the release of 700MHz frequencies for the new 700MHz sub-frequencies, the transition was not painless for everyone.
Indoor digital antenna amplifier with LTE filter
Many still have trouble making the final move to DVB-T2, In some cases, the most frequent issues come from the interference of our smartphones, both Android and iOS, and perhaps one of them is the problem.
It is a matter of interference, especially between network technology LTE Private cell phones and incoming signal to TV tuner. The solution is in a device close to thirty euros, and it can be purchased directly from Amazon
Many still have trouble making the final move to DVB-T2, In some cases, the most frequent issues come from the interference of our smartphones, both Android and iOS, and perhaps one of them is the problem.
It is a matter of interference, especially between network technology LTE Private cell phones and incoming signal to TV tuner. The solution is in a device close to thirty euros, and it can be purchased directly from Amazon.
There are many, spoiled for choice, but one of those who solved the problem of interference is Melicone AMP20, Internal digital antenna amplifier, with LTE filter. Lots of advantages and many satisfactions.
The device amplifies signals more than 10 times compared to the standard, improves quality in the event that there is a very weak signal at the input, or disturbances occur due to the excessive length of the connections. Not only.
It is also ideal for distributing the amplified signal to two separate devices, easy to install and ready to use. direct feeding a 220 volts. and hoax.
For correct operation, in fact, a clean input signal is required, with little noise and an adequate level. Only in this way will its performance be improved. In typical situations, with a weak but clean signal, the product works very well. Finally, sometimes different channels have different capacities and the AMP20 setting must be reduced so that the TV tuner does not become saturated.
L ‘AMP 20 mil It is used to amplify a high quality TV signal before a long extension cable or to split a good quality TV signal on two devices. Its dimensions are 7 x 11.5 x 11.3 cm, small and not bulky. Forty grams weighing.
If that also does not work, then contacting a technician should be mandatory, because the problem is more serious than it looks.
“Explorer. Devoted travel specialist. Web expert. Organizer. Social media geek. Coffee enthusiast. Extreme troublemaker. Food trailblazer. Total bacon buff.”
